Redlake MASD 4.2i Manuel d'utilisateur télécharger pdf (Page 24)

REDLAKE MASD, INC.

3.13 Save

TYPE IN: RESPONSE EXPLANATION

SAV

CR-LF Saves the current camera settings to EEPROM; these

settings will be recalled by a RESET or by turning the

camera power on.

NOTE: The EEPROM used by the SAVE command has a finite life of roughly 10,000 erase and

program cycles. We recommend that the SAVE command be used occasionally to store

your most generally applicable setup and not as a daily routine.

3.14 Status Query

The Status Query command enables the user to get all of the camera operating parameter

information with a single command.

TYPE IN: RESPONSE EXPLANATION

STS?

DEF xx

GAE xxx

BKE xxxx

MDE xx

SHE xx

EXE xx

TRM x

TRE x

STP x

SCP x

Gives complete camera status with one query. The

following parameters are transmitted with a carriage

return after each parameter:

Shows Defect Concealment status.

Shows Gain setting.

Shows Black Level setting.

Shows the operating Mode.

Shows the Shutter status

Shows the Exposure time.

Shows the Trigger logic polarity.

Shows the Exposure state.

Shows the polarity of the Strobe Pulse.

Shows the communications protocol.

A typical reply to STS? would be as follows:

DEF ON

GAE 6

BKE 610

MDE CD

SHE ON

EXE 100

TRM P

TRE 1

STP N

SCP 232

3.15 Identification Query

TYPE IN: RESPONSE EXPLANATION

IDN?

MegaPlus Model

4.2i, Vx.xx

Queries the camera model number and software

version.

91000058-003 Revision A 3-8 10/01/01

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Redlake MASD 4.2i Manuel d'utilisateur Page 24

Commentaires sur ces manuels